Screens Available From The System Screen - Agilent Technologies 1100 Series Reference Manual

7
Control Module Screens for the Agilent 1100 Column Compartment

Screens available from the System screen

System screen
Use the Esc key to receive Views on the F5 key. Choose System from the
pull-down menu. This screen shows the last activities in the system.
System - Control
Use the F1 key (Control) to select the TCC. Here you receive information
about the not-ready conditions if needed. F2 key (Reset) does a
re-initialization of the TCC.
System - Configuration
On the System screen use the F2 key (Configure) to select the TCC. Here you
define further special setpoints for the TCC operation. The option line informs
about a column switching valve, if installed (optional),.
176 1100 Series TCC Reference Manual