Drive Chain - Magliner Powered Stair Climber User Maintenance Manual

Remove screws in side rail with a T-40 Torx wrench. Lightly tap the RIGHT side (when
standing behind Powered Stair Climber) of the side rail with a soft rubber mallet.
!
Caution !
Tapping the LEFT side of the side rail will damage the main wiring harness.

5. Drive Chain

Be sure battery is not inserted. To inspect the drive chain, remove the left wheel (see page
22) and safety flap (see page 19). Pop off and rotate the plastic safety cover out of the way
with a flat screwdriver.
!
Caution !
Do not run Powered Stair Climber without the plastic safety cover securely in
place.
Next, check the chain to ensure none of the links are broken. If necessary, replace the
chain (part number 005627).
Fig. 4d
Fig. 5a
9