Drive Motor - Magliner Powered Stair Climber User Maintenance Manual

If links are broken, replace chain by disconnecting the connecting link. Remove old chain
and put the new chain in place with a new connecting link.

6. Drive Motor

With the battery in place, position the swing arm out of way so the bolts are easily reached.
Then, remove the battery from the Powered Stair Climber so no power can get to the unit.
To replace the drive motor*, remove both wheels (see page 22) and safety flap (see page
19).
* Drive Motor part numbers:
-010123 for the SAL 110 model
-010124 for the SAL 140 model
-010137 for the SAL 170 model
Fig. 5b
Fig. 6a
Sliding
Clutch
Connecting link
10