Introduction - Magliner Powered Stair Climber User Maintenance Manual

A. Introduction
Please read the Operator's Manual thoroughly to become familiar with the operation and
controls of the Powered Stair Climber. The Powered Stair Climber has been designed
specifically for serviceability so components can be easily replaced.
This Maintenance Manual contains:
 A troubleshooting guide
 Detailed directions to make each repair on your own
 Assembly drawings to help locate and describe parts
 A replacement parts list
The following are the tools needed to properly service the Powered Stair Climber:
 #1 Phillips screwdriver
 #2 Phillips screwdriver
 Flat screwdriver
 3mm Allen wrench
 5mm Allen wrench
 6mm Allen wrench
 8mm Allen wrench
 13mm Allen wrench
 7mm socket with ratchet
 13mm socket with ratchet
 T-40 Torx
®
wrench
 T-30 Torx
®
wrench
We sincerely appreciate your purchase of this exciting product. We hope this manual is
helpful. However, if you have questions please do not hesitate to call our customer service
department at 1-800-MAGLINE (624-5463) or 989-512-1000.
!
Caution !
Never make repairs to your Powered Stair Climber while battery is inserted.
3