Battery - Magliner Powered Stair Climber User Maintenance Manual

1. Battery

Make sure the battery is properly engaged into the spring-loaded battery clamps. Turn
on the main switch.
Fig. 1a Fig. 1b
Depress the ascend / descend button to initially turn on the Powered Stair Climber and
to toggle between the ascending and descending modes. The green light should be on.
Fig. 1c
If not, the fuse (part number 004607) for the battery may need changing. Remove the
battery cover by unscrewing the eight screws with a #1 Phillips screwdriver. Remove
the fuse. Test the fuse for continuity with a MultiMeter or similar. If it reads OL (digital)
∞
or (analog), change the 30 Amp fuse by pulling the old one out by hand and inserting
the new one.
Fig. 1d Fig. 1e
5