Round Up Switch - Magliner Powered Stair Climber User Maintenance Manual

14. Round up Switch

Be sure battery is removed from unit so no power goes to the Powered Stair Climber.
Remove the round up switch (part number 030148) by popping out of handle hole with a
flat screwdriver. Unplug the switch from the main wiring harness.
Fig. 14a Fig. 14b
Test the round up switch with a MultiMeter by touching each prong to each connection.
When button is not depressed, the display should read OL (digital) or ∞ (analog). Depress
the button and the display should read near 0.3. If it reads OL when the button is
depressed, replace the round up switch.
Fig. 14c
To reassemble, hook wires into the new switch and push back into place.
21