Disassembling The Door - Electrolux GOOD Service Manual

3.0 cu. ft. horizontal axis washer
Table of Contents

Advertisement

Disassembling the door:

1. To remove the outer door panel, separate the two
panels on the hinge side and slide the outer panel
toward the door strike side to disengage the inner
panel from the outer panel flange.
2. Remove the outer glass (some models) by removing
the door strike and the (4) screws holding the outer
glass to the inner panel and lift the glass off.
3. The inner glass is held in place by (5) molded tabs
in the rear door cover. To remove the glass, grab the
edge of the cover by the tab and twist it away from
the glass.
To remove door hinges:
1. Remove the (4) screw holding the hinge to the door
and front panel.
66

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Better

Table of Contents