Electrolux GOOD Service Manual page 26

3. Attach the front brackets to the pedestal with
four #8 screws (2 per bracket).
NOTE: If dryer was previously installed,
disconnect power cord and vent hose.
Also, make sure the leveling legs are
adjusted fully into the dryer.
4. Using two or more people, carefully lift the dryer onto
the pedestal, tilting the dryer back slightly to engage
the slots in the rear of the dryer with the tabs of the
rear brackets on the pedestal.
5. Set the dryer down onto the pedestal making sure
the service panel bracket on the dryer is behind the
front brackets of the pedestal.
26