Table of Contents
Advertisement
Interrupting a programme
Depress the
corresponding light starts to flash. Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to
Now you can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the
If the DOOR remains locked (door icons
display ) , this means that the machine is already heating, that the water level is
above the bottom edge of the door.
If you cannot open the door but you need to open it you have to switch the
machine off by turning the selector dial to
minutes the door can be opened (pay attention to the water level and
temperature!). After having closed the door, select again the washing
programme and press Start/Pausa.
At the end of the programme
The machine stops automatically, the
appear on the display.
If the RINSE HOLD
the display, a flashing
off and the door remains locked to indicate that the water must be emptied out
before opening the door.
To empty out the water please read the steps on the Rinse Hold option
paragraph.
Turn the programme selector dial to
Remove the laundry from the drum and carefully check that the drum is empty.
If you do not intend to carry out another wash, close the water tap. Leave the
door open to prevent the formation of mildew and unpleasant smells.
8
button to interrupt a programme which is running, the
UIT/ARRET
option have been selected, the DOOR
0
will appear on the display, the START/PAUSE light goes
to cancel a programme which is running.
8
button.
remains still visualized on the
UIT/ARRET
8
light goes off and a flashing
to switch the machine off.
UIT/ARRET
Use
. After about some
0
will
illuminates on
19
Advertisement
Table of Contents
