Electrolux GOOD Service Manual page 82

5. Remove the (2) screws holding the housing to the
center bar.
6. Remove the (2) screws holding the housing to the
console panel.
7. Release the (2) tabs, one on each side, locking the
housing to the console mounting panel.
8. Slide the housing back until the tabs of the center
cross bar release and the housing drops down.
9. Disconnect the advanced rinsing technology hose.
10. Push down on the tub and swing the front of the
housing toward the center of the washer. Work the
housing out from under the center brace and lift the
housing out.
82