Server Technology PRO2 User Manual page 239

Command Syntax
Command Access
Example
Command Syntax
Command Access
Example
Chapter 8: Using the Command Line Interface (CLI)
show system
Switched PDU: show system
System Information
Uptime: 1 day 20 hours 0 minutes 13 seconds
Firmware: Sentry Switched PDU Version 8.0a
Build Info: Rev 1032, January 7 2015, 10:52:42
Boot Info: 4.0d-r139
Hardware: NIM2-1L (129), 75 MHz, 16MB RAM, 4MB FLASH
NIC S/N: 9600165
Active Users: 1
Location: PIPS-POPS Switched
show tacacs
Switched PDU: show tacacs
TACACS+ Configuration
TACACS+: disabled
Primary Host: <not set>
Secondary Host: <not set>
Port: 49
Key: <not set>
PRO2 User Guide
•
239