Server Technology PRO2 User Manual page 162

Switched PDU: set
'set' menu options:
access banner bluetooth
energywise feature
loadshed location
sntp spm ssh syslog
Switched PDU: show
'show' menu options:
access bluetooth
ftp ldap lines loadshed
radius sensors shutdown
The following conventions apply to the command syntax shown in the Command Details section:
[argument] mandatory argument that is not prompted for.
[argument] optional argument that is not prompted for.
<argument> argument that will be prompted for if not specified on the command line.
{argument} argument that can only be prompted for.
Command Syntax
Chapter 8: Using the Command Line Interface (CLI)
branch config
ftp http https ipv4
net ocp outlet phase
tacacs tacpriv
branches config cords
log network
snmp sntp syslog
set access button [disabled | enabled]
set access clitimeout <value>
set access localadmin [required | optional]
set access logorder [newest | oldest]
set access method [localonly | ldaponly | ldaplocal | radiusonly | radiuslocal |
tacacsonly | tacacslocal]
set access prompt <prompt string>
set access strongpw [optional | required]
set access webloglen <value>
set access webtimeout <value>
cord dhcp dns email
ipv6 ldap ldapgroup
port radius sensor
telnet unit ups user
email energywise features
ocps outlets phases
system tacacs units
PRO2 User Guide
line
snmp
ports
ups
•
162