Server Technology PRO2 User Manual page 203

Command Syntax
Parameters
Command Access
Command Syntax
Parameters
Command Access
Command Syntax
Parameters
Command Access
Chapter 8: Using the Command Line Interface (CLI)
set location <location string>
The set location command uses the following parameter:
set net [disabled | ipv4only | dualv6v4]
The set net command uses the following parameters:
set ocp email [disabled | enabled] <name | id | ALL>
set ocp loadmax <name | id | ALL> <value>
set ocp snmpt [disabled | enabled] <name | id | ALL>
The set ocp command uses the following parameters:
PRO2 User Guide
•
203