Server Technology PRO2 User Manual page 215

Command Syntax
Parameters
Command Access
Command Syntax
Parameters
Sub-Parameters
Command Access
Chapter 8: Using the Command Line Interface (CLI)
set tacacs primary <hostname>
set tacacs secondary <hostname>
set tacacs port <port>
set tacacs key {key}
The set tacacs command uses the following parameters:
set tacpriv access [admin | ononly | poweruser | rebootonly | user | viewonly] <priv level>
set tacpriv sysmon [disabled | enabled] <priv level>
The set tacpriv command uses the following parameters:
The set tacpriv command uses the following sub-parameter:
PRO2 User Guide
•
215