Server Technology PRO2 User Manual page 189

Command Syntax
Parameters
Sub Parameters
Usage Guidelines
Command Access
Chapter 8: Using the Command Line Interface (CLI)
set branch email [disabled | enabled] <name | id | ALL>
set branch load [alarmhi | alarmlo | warnhi | warnlow] <name | id | ALL> <value>
set branch load hyst <value>
set branch snmpt [disabled | enabled] <name | id | ALL>
The set branch command uses the following parameters:
The set branch command uses the following sub-parameters:
min <= alarmlo <= warnlo <= warnhi <= alarmhi <= max
PRO2 User Guide
•
189