Server Technology PRO2 User Manual page 217

Sub-Parameters
Command Access
Command Syntax
Parameters
Chapter 8: Using the Command Line Interface (CLI)
The set unit command uses the following sub-parameters:
set ups addline <UPS#> <line name | id | ALL>
set ups commstr <UPS#> <get community string>
set ups delline <UPS#> <line name | id | ALL>
set ups host <UPS#> <hostname>
set ups oidspoll <UPS#> <oid>
set ups onbattery <UPS#> <value>
set ups onutility <UPS#> <value>
set ups port <UPS#> <port>
set ups type <UPS#> <value>
The set ups command uses the following parameters:
PRO2 User Guide
•
217