Server Technology PRO2 User Manual page 223

Command Syntax
Command Access
Example
Chapter 8: Using the Command Line Interface (CLI)
show cords
Switched PDU: show cords
ID Cord Name
-- ---------
AA Master_Cord_A
BA Link_Cord_A
SNMP Email
ID Notif. Notif.
-- ------ ------
AA enabled enabled
BA enabled enabled
Power Power
ID Lo-Alrm Lo-Warn
-- ------- -------
AA 0W 0W
BA 0W 0W
App Pwr App Pwr
ID Lo-Alrm Lo-Warn
-- ------- -------
AA 0VA 0VA
BA 0VA 0VA
Common Cord Settings
Cord Power Hysteresis:
Cord Apparent Power Hysteresis:
Cord Power Factor Hysteresis:
Cord 3-Phase Out-Of-Balance Hyst:
User / Factory User
Current Capacity Nominal Voltage
---------------- ---------------
30A / 30A 230V
30A / 30A 230V
Power Power Balance
Hi-Warn Hi-Alrm Hi-Warn
------- ------- -------
14490W 16560W 15%
14490W 16560W 15%
App Pwr App Pwr PF
Hi-Warn Hi-Alrm Lo-Alrm
------- ------- -------
14490VA 16560VA 0.70
14490VA 16560VA 0.70
100
100
0.0
2%
PRO2 User Guide
/ Factory
/ 230V
/ 230V
Balance
Hi-Alrm
-------
20%
20%
PF
Lo-Warn
-------
0.80
0.80
•
223