Server Technology PRO2 User Manual page 196

Command Syntax
Parameters
Sub-Parameters
Command Access
Chapter 8: Using the Command Line Interface (CLI)
set ftp autoupdate [disabled | enabled]
set ftp autoupdate day [sunday-saturday | everyday]
set ftp autoupdate hour [1am-12am | 1pm-12pm]
set ftp directory <path name>
set ftp filename <filename>
set ftp host <hostname>
set ftp password <password>
set ftp server [disabled | enabled]
set ftp test [full]
set ftp username <username>
The set ftp command uses the following parameters:
Sets the username for logging into the remote FTP update server.
0-32 characters.
The set ftp command uses the following sub-parameters:
PRO2 User Guide
•
196