Sub-Parameters
Command Access
Command Syntax
Parameters
Sub-Parameters
Command Access
Chapter 8: Using the Command Line Interface (CLI)
The set ups command uses the following sub-parameter:
set user access [admin | ononly | poweruser | rebootonly | user | viewonly] <username>
set user password <username> {password} {verify password}
set user sysmon [disabled | enabled] <username>
The set user command uses the following parameters:
The set user command uses the following sub-parameter:
PRO2 User Guide
•
218
Need help?
Do you have a question about the PRO2 and is the answer not in the manual?