Server Technology PRO2 User Manual page 238

Command Syntax
Command Access
Example
Command Syntax
Command Access
Example
Chapter 8: Using the Command Line Interface (CLI)
show sntp
Switched PDU: show sntp
SNTP Configuration
Local Date/Time:
Primary Host:
Secondary Host:
Local GMT Offset:
Daylight Saving Time: enabled
DST Start:
DST End:
show syslog
Switched PDU: show syslog
SYSLOG Configuration
Host 1: <not set>
Host 2: <not set>
Port: 514
Protocol: RFC3164
Debug Messaging: disabled
2014-05-06 14:30:41 (DST)
2.servertech.pool.ntp.org
1.servertech.pool.ntp.org
-8:00 hours
2nd Sunday in March at 02:00:00
1st Sunday in November at 02:00:00
PRO2 User Guide
•
238