Download Print this page

Electrical Connection - King gates LINEAR Instruction Manual

Advertisement

Before installing the product ascertain that safety conditions are observed according to the law, rules and regulation.
Use personal safety devices and locate warning signs on the motorized gate.
Unfulfilment of the below listed direction will release the Antoniolli Mario & C. sas, holder of the KING gates mark, from any
responsibility for damage caused to people or things.
-Ascertain the intigrity of the packing when opening it.
-In case of anomalies in the functioning, turn immediatly off the gear-motor, disconnect electrical power and operate the gate
manually the problem has been found and salved.
-Do not modify the product in any part.
-Only authorized and qualified staff is alloned to disassemble the product.
-Prevent any part of the automation from being next to any source of heat or in contact with liquid substances.
-Use only adeguate power supply cables.
-To optimize the functioning of the automation, King gates accessories only.
-Disposal of waste material has to observe local regulations.
-Installing, testing and first functioning have to observe the laws in force.
-Effettuare un collaudo periodico con una frequenza non superiore ai 12 mesi.
TECHNICAL SPECIFICATIONS AUTOMATION
Power supply
motor rating
Termic protection
Electrical input
Frequency
- Fix the big stirrup respecting the measures in the chart "TAB". Fix the gear-motor horizontally (Fig.A)
- Fix the gear-motor to the big stirrup (1) with the included screws.
- Estend the inox pipe (3) until the mechanical stop, screwing for 360° to avoid the stress of the sliding pin.
- Fix the small stirrup (4) in the extreme inox pipe using the included screws.
- Fix the small stirrup to the gate. Fix the gear-motor horizontally.
- Place the mechanical-stop in position of opening and closing (Fig.C)
For the manual release using the included key on the seat (2).

ELECTRICAL CONNECTION

BLACK-BROWN=
GREY (BLUE)=
YELLOW-GREEN=
WARNINGS
MAIN FEATURES
(Vdc)
(W)
(°C)
(A)
(Hz)
INSTALLATION
PHASE
COMMON
EARTH
Linear 300
230 Vac
230
350
140
1.5
50/60

Advertisement

loading