Table of Contents
Advertisement
5 Using a 3 mm Allen wrench, tighten the screws to lock the fixture in place. Do not over
tighten.
R E M O V I N G T H E A L I E N 0 5
Once installed it is not recommended that you remove the Alien 05 unless
absolutely necessary.
To remove the Alien 05:
1 Remove the 3 Allen screws in the mounting ring (shown in the previous section) using
a 3 mm Allen wrench.
2 Remove the fixture from the wall/ceiling panel.
During this process, particularly if the fixture is wall mounted, you might lose one
or more of the three clamp nuts (P/N 08074102) and rubber bands (P/N 34420503)
that hold the fixture firmly in place when mounted. Should this occur replacement
parts can be ordered from your Martin dealer.
Installation
9
Advertisement
Table of Contents
