Removing The Diffuser Filter; Replacing Color Filters - Martin Alien 05 User Manual

6 Gently insert the lamp into its housing.
7 Replace the cover, being careful not to over tighten.
R E M O V I N G T H E D I F F U S E R F I L T E R
The diffuser filter sits in a metal holder on the outside of the sphere in front of the
lens. It is held in place with a spring catch and is simple to remove. You can also
remove the metal holder if you want to.
Warning! The fixture sphere gets hot during operation. Disconnect power
and allow the fixture sphere to cool for 15 minutes before

removing the diffuser filter.

R E P L A C I N G C O L O R F I L T E R S
Color filter replacement requires a 3 mm Allen wrench.
Warning! Allow the fixture sphere to cool for 15 minutes before removing
the color filter cover.
To replace color filters:
1 Disconnect the fixture from power and allow it to cool.
2 Rotate the sphere to the position shown in the following illustration:
14 Service