SHINOLA 5021.D Manual page 8

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO
Pull crown out to position III.
1 1
(All four chronograph hands are in
their correct or incorrect zero position.)
2 2 Keep push-buttons A and B depressed
simultaneously for at least 2 seconds.
(The center stop-second rotates by
360° - corrective mode is activated.)
3 3 Press push-button A to single step the
center stop-second hand. Press and
hold push-button A to advance the center
stop-second hand quickly. 3b Press
push-button B to advance to the next hand.
4 Press push-button A to single step the 1/10 second counter hand.
Press and hold push-button A to advance the 1/10 second hand quickly.
4b Press push-button to advance to the next hand.
B
5 Press push-button A to single step the minute and the hour counter hands.
Press and hold push-button A to advance the minute and hour counter hands
5b
quickly. Press push-button B to advance to the next hand.
6 Return the crown to position I.
BASIC FUNCTION (START / STOP / RESET)
Example
1 Start: Press push-button A.
2 Stop: to stop the timing, press push-button A.
once more and read the four chronograph
counters: 4 hr. / 20 min. / 5 sec. / 7⁄10 sec.
Zero positioning: Press push-button B.
3
(The four chronograph hands will
be reset to their zero positions.)
4
3
2
A
1
I II III
6
B
2
3b
1
1
A
B
3
14
ACCUMULATED TIMING
Example
1 Start: start timing.
5
2 Stop: e.g., 15 min. 5 sec. following
3 Restart: timing is resumed.
*Stop: e.g., 10 min. 5 sec. following
4
The accumulated time = 25 min. 10 sec.
5 Reset: The four chronograph hands
are returned to their zero positions.
Please note:
* Following
4b
continued by pressing push-button
5b
INTERMEDIATE OR INTERVAL TIMING
Example
1 Start: start timing.
2 Display interval:
e.g., 10 min. 10 sec. following
Timing continues in the background.
*
3 Making up the measured time:
the four chronograph hands are quickly
2
advanced to the ongoing measured time.
Stop: (Final time is displayed).
4
5 Reset: The four chronograph hands are
returned to their zero positions.
Please note:
* Following
displayed by pressing
1 .
3 .
4 , the accumulation of the timing can be
A (Restart/Stop, Restart/Stop,...)
.
1
3
, further intervals or intermediates can be
B (display interval / make up measured time, ...)
15
4
3
2
1
A
B
5
4
1
A
B
2
3
5