SHINOLA 5021.D Manual page 4

SINGLE TIME MODELS
SETTING THE TIME
1 Pull out the crown to position II.
(The watch stops.)
Turn the crown until you reach the
2
correct time.
3 Push the crown back to position I.
SINGLE TIME WITH DATE MODELS
SETTING THE TIME
Pull out the crown to position III.
1
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back into position I.
SETTING THE DATE
1 Pull out the crown to position II.
(The watch continues to run.)
2 Turn the crown until the correct date appears.
3 Push the crown back to position I.
1
I II
3
1
I II III
3
1
I II
2
3
6
CHRONOGRAPH MODEL 5021.D
DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
2
- the crown is in position
(= normal position).
- the two chronograph hands are
precisely at zero position following
activation of push-button B. If the hands
are not precisely at zero, their positions
must be adjusted. (See the chapter
Adjusting the Chronograph Hands to Zero .)
SETTING THE TIME
1 Pull out the crown to position III.
2
(The watch stops.)
2 Turn the crown until you reach the
correct time.
3 Push the crown back to position I.
SETTING THE DATE
1 Pull out the crown to position II.
(The watch continues to run.)
2 Turn the crown until the correct date appears.
3 Push the crown back to position I.
Center stop-second
I
Minute hand
Hour hand
Minute counter
Date
7
Second hand
A
I
B
1
I II III
2
3
1
I II
2
3