SHINOLA 5021.D Manual page 13

INTERMEDIATE OR INTERVAL TIMING
Example
Start: Press push-button A.
Display interval:
e.g., 10 min. 10 sec. following 1 .
Timing continues in the background.
*
Making up the measured time:
The chronograph hands are quickly
advanced to the ongoing measured time.
Stop: Final time is displayed.
Reset: The three chronograph hands are
returned to their zero positions.
Please note:
* Following 3 , further intervals or intermediates can be
displayed by pressing B (display interval / make up measured time, ...)
A
B
24
ADJUSTING THE CHRONOGRAPH HANDS TO ZERO POSITION
Example
One or several chronograph hands are not in
their correct zero positions and have to be
adjusted (e.g. following a battery change).
Pull out the crown to position II.
(All chronograph hands are in their correct
or incorrect zero position).
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds then release
(the second counter hand rotates by 360º
—corrective mode is activated).
Adjusting the second counter hand:
Single step — press A 1x short
Continuous — press A long
Adjusting the next hand — press B
Adjusting the 1⁄10 second counter
hand (position 6h):
Single step — press 1x short
A
Continuous — press A long
Adjusting the next hand — press B
Adjusting the minute counter (position 9h):
Single step — press A 1x short
Continuous — press A long
Returning the crown to position I.
(Termination of the chronograph hands
adjustment (can be carried out at any time).
A
B
25