SHINOLA 5021.D Manual page 12

CHRONOGRAPH MODEL 5040.F
SETTING THE TIME
Pull out the crown to position II. (The watch stops.)
Turn the crown until you reach the correct time.
Push the crown back into position I.
NOTE: In order to set the time to the exact second,
1 must be pulled out when the second hand is in
position «60». Once the hour and minute hands have
been set, 3 must be pushed back into position I
at the exact second.
SETTING THE DATE (QUICK MODE)
Press the corrector C once to adjust the
date 1 day forward.
NOTE: The date for the following day must
be set during the date changing phase
between approx 9:00 PM and 12:20 AM.
SETTING TIME / DATE / DAY / MONTH
Pull out the crown to position II.
(The watch stops.)
Turn the crown until the current time is shown.
Push the crown back into position I.
Press the corrector C to advance the date hand.
Press the corrector D to advance the day.
Press the corrector E to advance the month.
C
D E
C
22
BASIC FUNCTION ( START / STOP / RESET )
Example
Start: Press push-button A.
Stop: To stop the timing, press push-button
once more and read the three chronograph
counters: 4 min. / 38 sec. / 7⁄10 sec.
Zero positioning: Press push-button B.
(The three chronograph hands will
be reset to their zero positions.)
ACCUMULATED TIMING
Example
Start: start timing.
.
Stop: e.g., 15 min. 5 sec following 1
Restart: timing is resumed.
*Stop: e.g., 13 min. 5 sec. following
The accumulated time = 28 min. 10 sec.
Reset: The three chronograph hands
are returned to their zero positions.
A
.
3 .
23
A
B
A
B