SHINOLA 5021.D Manual page 5

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO
1 Pull crown out to position III.
(All two chronograph hands are in
their correct or incorrect zero position.)
2 Keep push-buttons A and B depressed
simultaneously for at least 2 seconds.
(The center stop-second rotates by 360°
- corrective mode is activated.)
3 Press push-button A to single step the
center stop-second hand. Press and
hold push-button to advance the center
A
stop-second hand quickly. 3b Press
push-button B to advance to the next hand.
4 Press push-button A to single step the
minute counter hand. Press and
hold push-button A to advance the
minute counter hand quickly.
5 Return the crown to position I.
BASIC FUNCTION (START / STOP / RESET)
Example
Start: press push-button A.
1
2 Stop: to stop the timing, press push-button
once more and read the two chronograph
counters: 20min / 10sec.
3 Zero positioning: Press push-button B.
(The two chronograph hands will
be reset to their zero positions.)
3
2
A
I II III
B
2
3b
1
A
A
B
3
8
ACCUMULATED TIMING
Example
4
1 Start: start timing
2 Stop: e.g., 15 min. 5 sec. following
1
3 Restart: timing is resumed
*Stop: e.g., 13 min. 5 sec. following
4
The accumulated time = 28 min. 10 sec.
5
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
* Following
continued by pressing push-button
INTERMEDIATE OR INTERVAL TIMING
Example
1 Start: start timing.
2 Display interval:
e.g., 10 min. 10 sec. following
Timing continues in the background.
*
3 Making up the measured time:
2
the two chronograph hands are quickly
advanced to the ongoing measured time.
4 Stop: e.g., 28 min. 10 sec. following
5 Reset: the three chronograph hands
are returned to their zero positions.
Please note:
* Following
displayed by pressing
1 .
3 .
4
, the accumulation of the timing can be
A (Restart/Stop, Restart/Stop,...)
1 .
1 .
3
, further intervals or intermediates can be
(display interval / make up measured time, ...)
B
9
4
3
2
1
A
B
5
4
1
A
B
2
3
5