Access Virus Rack XL User Manual page 104

104
CHAPTER 7
The Parameters
- VELOOFF The note off velocity is the modu-
lation source. According to the fact, that the
note off velocity is only known when the key
is released again, here, the VIRUS uses the
note on velocity, when the key is held. There-
fore both, note on- and off velocities, are ac-
tive here.
- KEYFLW The note number respectively the
pitch is used as the modulation source (Key-
follow)
- RANDOM A random number which remains
for the whole duration of the note on, is used
as
the modulation source here.
The control range of the source may be limited
via the AMOUNT values or inverted so that the
modulation occurs strictly within the desired
value range for the target parameter. For your
target parameters, you can chose from among
virtually all sound parameters that feature an in-
finitely variable control range – ergo, you have
more than 100 modulation destinations at your
disposal.
If you haven't selected a source for one of the
ASSIGN options (SOURCE = OFF), the subordi-
nate parameters will not be displayed.
In addition to the three ASSIGN options, the us-
er interface features – as discussed earlier – a
freely definable modulation destination for LFO
1 and 2 called ASSIGN.
ASSIGN 1 SOURCE
source for the first modulation assignment.
01111111111111111112
1 ASSIGN 1
Source ChanPres≤
61111111111111111154
Selects the modulation
ASSIGN 1 DESTINATION
lation destination for the first modulation as-
signment.
01111111111111111112
1 ASSIGN 1
Dest Panorama≤
61111111111111111154
ASSIGN 1 AMOUNT Controls the intensity of
the first modulation allocation.
01111111111111111112
1 ASSIGN 1
Amount
61111111111111111154
ASSIGN 2 SOURCE Selects the modulation
source for the second modulation assignment.
ASSIGN 2 DESTINATION 1
modulation destination for the second modula-
tion assignment.
ASSIGN 2 AMOUNT 1 Controls the intensity
of the second modulation assignment for the
first modulation destination.
ASSIGN 2 DESTINATION 2
ond modulation destination for the second
modulation assignment.
ASSIGN 2 AMOUNT 2 Controls the intensity
of the second modulation assignment for the
second modulation destination.
Selects the modu-
+10≤
Selects the first
Selects the sec-