Access Virus Rack XL User Manual page 44

44
CHAPTER 6
Concept and Operation
In Play mode, the other four knobs have the
same function as in the EDIT parameter group.
Accordingly, you can access Filter Cutoff, the
two Soft-Knobs and Master Volume directly.
If you want to return to the previously selected
parameter group or to the previously edited pa-
rameter, simply press the UP or DOWN button.
When you call up a parameter in the display
menus, you will also determining the function of
the dedicated knobs (those with the fixed la-
bels). If, for example, you select the LFO sec-
tion, then the menu of one of the three LFOs is
indicated in the upper line of the display. The
parameter that is controlled via the VALUE knob
or buttons is indicated in the lower line. When
you select the LFO menu, you must also deter-
mine which LFO is to be controlled by the dedi-
cated knobs. So if you want to use these
labeled knobs to control the functions LFO
Rate, Shape, Contour and Keyfollow for LFO 2,
you must use the PARAMETER buttons in the
display to dial in one of the parameters of LFO
2. This selected parameter may then be edited
via the VALUE knob. At the same time, you can
control LFO 2's Rate, Shape, Contour and Key-
follow via the four remaining knobs.
Once you've selected a parameter group or
section, the individual LEDs located next to the
knobs indicate whether or not the knobs are as-
signed a function in the currently active menu.
This means that if, for example, you edit LFO 3
in the LFO section, then the parameters Rate,
Shape and Keyfollow are directly accessible as
is the case with LFO 2. However, LFO 3 does
not feature the Contour parameter. Conse-
quently, the LED of the Contour knob will not
light up since the knob serves no function in
this situation.
If you press the PARAMETER buttons briefly,
you can scroll through the parameters con-
tained in the selected display menu step by
step in the desired direction. If you press and