Operation - Access Virus Rack XL User Manual

Operation

PARAMETER SELECTION AND DATA
ENTRY
The parameters of the Virus rack XL are control-
led via the five encoder knobs. The functions of
this row of knobs may be assigned to seven pa-
rameter groups that are indicated visually by
the seven LEDs located to the left of the encod-
ers.
Here's a brief explanation of the parameter
groups:
OSC The oscillator section
FILT The filter section
ENV The envelope section
LFO The LFO section
EFX The effect section
EDIT Here you'll find various peripheral
sound parameters
ARP The Arpeggiator section
CTL Organizational parameters
Select parameter groups by means of the two
vertically arrayed UP and DOWN buttons locat-
ed next to the seven LEDs. The function of the
knobs corresponds to the respective label on
the selected parameter group and/or row.
The left knob is labeled "VALUE"; this is a spe-
cial feature that requires some explanation:
This knob is not labeled on the panel with a pa-
rameter name that indicates its purpose. In-
stead, the name of the parameter and its
function is shown in the display. Apart from the
envelope section, each of the parameter groups
features these peripheral parameters that are
grouped in menus. These are ancillary parame-
ters that complement the directly accessible
parameters. They may be selected via the PA-
RAMETER buttons and controlled via the afore-
mentioned VALUE knob or the two VALUE
buttons.
In order to return to the current Play mode
(MULTI, SINGLE or MULTI-SINGLE), press the
MULTI or SINGLE button. Then you can switch
programs as usual via the VALUE buttons; the
VALUE knob is now disabled.
PDF VERSION - RESTRICTIONS APPLY
ACCESS VIRUS RACK XL OS5
Operating Modes
43