Rear Output Shaft Assembly Disassembly And Reassembly - Suzuki Grand Vitara Service Manual

3C-72 Transfer: Motor-Shift Type (Transfer with Shift Actuator)
Reassembly
1) Clean all components thoroughly, inspect them for
any abnormality and replace with new ones as
necessary.
2) Press-fit bearing (1) to front output shaft using
special tool and press.
Special tool
(A): 09913–84510
(A)
3) Press-fit bearing (1) to front output shaft using
special tool and press.
Special tool
(A): 09913–76010
www.CarGarage.ir
2
1
I5JB0A331073-01
(A)
1
2
I5JB0A331074-01
www.CarGarage.ir
Rear Output Shaft Assembly Disassembly and
Reassembly
Disassembly
1) Remove snap ring (1) from rear output shaft (2).
1
2) Remove bearing (1) from rear output shaft (2) using
bearing puller (3) and press (4).
4
3
Reassembly
1) Clean all components thoroughly, inspect them for
any abnormality and replace with new ones as
necessary.
2) To ensure lubrication of rear output shaft (1), air blow
oil holes (2) and make sure that they are free from
any obstruction.
2
S5JB0A3316048
2
I5JB0A331075-01
1
2
I5JB0A331076-01
1
I5JB0A331077-01