Remove The Shipping Materials; Inspect Firebox; Clean The Appliance; Accessories - Quadra-Fire QFI30FB-IFT Homeowner And Installation Manual

Hide thumbs Also See for QFI30FB-IFT:

Table of Contents

Enlarged version

B. Remove the Shipping Materials

Remove shipping materials from inside or underneath the

firebox. Remove metal panels covering electrical compo-

nents on sides of appliance.

Note: Remove the zip ties on the exterior sides of the ap-

pliance that hold the electrical cord and gas line in place

for shipping.

C. Inspect Firebox

Surface cracking or crazing of firebrick material is normal

and expected. All cracks are acceptable and do not require

replacement of the unit or the firebox with the exception of:

• Cracks compromising the surface plane of the firebox.

See Figure 11.5.

Figure 11.5. Surface plane of firebox is comprised and should be

replaced.

D. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated

inside the firebox or underneath in the control cavity.

E. Accessories

Install approved accessories per instructions included

with accessories. Contact your dealer for a list of ap-

proved accessories.

WARNING! Risk of Fire and Electric Shock! Use ONLY

Hearth & Home Technologies-approved optional acces-

sories with this appliance. Using non-listed accessories

could result in a safety hazard and will void the warranty.

Quadra-Fire • QFI30FB-IFT, QFI35FB-IFT Installation Manual • 2555-980 Rev. C • 9/18

Table of Contents

Qfi35fb-ift