Quadra-Fire QV26E-B Owner's Manual
Quadra-Fire QV26E-B Owner's Manual

Quadra-Fire QV26E-B Owner's Manual

Electric fireplace/insert

Advertisement

Quick Links

Models:
QV26E-B
Electric Fireplace/Insert
Important operating
a n d m a i n t e n a n c e
instructions included.
WARNING
If the information in these instruc-
tions is not followed exactly, a
fi re may result causing property
damage, personal injury, or death.
• Do not store or use gasoline or other fl am-
mable vapors and liquids in the vicinity of
this or any other appliance.
• Comply with all minimum clearances to
combustibles as specifi ed. Failure to
comply may cause house fi re.
Made in China
CAUTION
DO NOT DISCARD THIS MANUAL
Read, understand
and follow these
instructions for safe
i n s t a l l a t i o n a n d
operation.
Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05
Owner's Manual
Installation and Operation
Leave this manual with
party responsible for
use and operation.
WARNING
HOT! DO NOT TOUCH.
SEVERE BURNS MAY RESULT.
CLOTHING IGNITION MAY RESULT.
Glass and other surfaces are hot
during operation and cool down.
Keep children away.
CAREFULLY SUPERVISE children in same room
as heater.
Alert children and adults to hazards of high
temperatures.
Keep clothing, furniture, draperies and other
combustibles away.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QV26E-B and is the answer not in the manual?

Questions and answers

Summary of Contents for Quadra-Fire QV26E-B

  • Page 1 Alert children and adults to hazards of high combustibles as specifi ed. Failure to temperatures. comply may cause house fi re. • Keep clothing, furniture, draperies and other combustibles away. Made in China Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 2 Hearth & Home Technologies Inc. 1915 W. Saunders Street Mt. Pleasant, IA 52641 UL 2021 FIXED AND LOCATION DEDICATED ELECTRIC ROOM HEATER Made in China VOLTS: 120V MODEL XXXX DATE WATTS: 1500W SERIAL XXXXXXX FREQUENCY:60Hz Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 3: Table Of Contents

    C. Mantel ........14 Note: An arrow ( ) found in the text signifi es change in content. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 4: Listing And Code Approvals

    S AV E T H E S E I N S T R U C T I O N S F O R F U T U R E adjustment, or repair. REFERENCE. • Do not use outdoors. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 5: Getting Started

    Actual installation may vary slightly due to individual design preferences. The illustrations and diagrams used throughout these installation instructions are not drawn to scale. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 6: Selecting Heater Location

    Immediately call a qualifi ed service technician to inspect heater and to replace any part of the control system which has been under water. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 7 9-3/4 in. (248 mm) 1/2 in. min. (13 mm) 9-3/4 in. 1 in. min. (248 mm) (26 mm) Model # 26-1/2 18-1/2 26-1/8 QV26E-B Figure 3.1 Heater Locations Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 8: Frame The Heater

    24 in. (610 mm), 28 in. (711 mm) and 32 in. (813 mm) high. 22-7/8 in. (581 mm) (header height) 26-1/2 in. (673 mm) 9-3/4 in. (248 mm) Figure 3.2 Framing the Heater Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 9: Installation

    fl anges on both sides of the heater and nail to the framing. • To fi nish out the heater, follow the instructions found in Section 6. • To complete heater installation, see Section 5. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 10: As An Insert

    If necessary, use the leveling bolts included in the manual bag. Screw the bolts into the nuts installed in the bottom of the insert (see replacement parts diagram). Turn bolts in until the insert is level. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 11: Wiring

    If installing inside a pre-existing fi replace and if permitted by local codes, an electrician may install an outlet box inside the existing fi replace. Place the outlet in the lower back of the fi rebox. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 12 110V/120V Wiring Diagram Black White Cable Thermistor Sensor Power Cord Wire with Ribs No Connection Black Wire to Heater Power Cord Black Wire Switch Brown Assembly Cable Black Figure 4.2 110V/120V Wiring Diagram Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 13: Accessories

    Do NOT operate this heater without the front face installed. Installation of other optional accessories may be done at this time. The heater is now ready for operation. See Section 7. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 14: Finishing

    Note: Finishing materials are normally installed behind the nailing fl anges or up to the sides of the nailing fl anges. Allow room for the front to be added and the heater to be anchored. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 15: Operating Instructions

    Do NOT store fl ammable materials close to heater. • Keep all such liquids well away from the heater while it is in use. Figure 7.1 General Operating Parts Combustible materials may ignite. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 16: Troubleshooting

    Odor. The heater may emit a slight, harmless odor when fi rst used. This is a normal condition caused by initial heating of the internal parts and will not occur again. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 17: Maintenance And Service

    Place the new bulb in the socket. See Figure 9.2. Follow directions on the light bulb package for handling requirements. • Reinstall the hearth assembly. Bulbs Figure 9.2 - Replacing the Bulbs Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 18: Maintenance Task List

    2. Confi rm there is no damage to glass or glass frame. Replace as necessary. 3. Clean glass using a non-abrasive cleaner such as Brasso©. Circulation Compartment 1. Remove any foreign objects. 2. Verify unobstructed air circulation. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 19: Reference Materials

    1 in. (26 mm) 1 in. (26 mm) 22-7/8 in. 16 in. (581 mm) (407 mm) 22-5/8 in. (575 mm) 26 in. (661 mm) 4-1/4 in. (108 mm) 27-5/8 in. (702 mm) Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 20: Optional Components

    PBT = Polished Brass Trim PBT26EA PBT26ER SST26EA SST26ER SST = Stainless Steel Trim Cabinets Several styles of cabinets are available for use with these heaters. See your dealer/distributor for styles and sizes. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 21 28 in. 24 in. DF-26ERA-BK4028 Remington Avenue 40 in. 28 in. DF-26ESP-BK4028 Sun Prairie 40 in. 28 in. DF-26ERA-BK4432 Remington Avenue 44 in. 32 in. DF-26ESP-BK4432 Sun Prairie 44 in. 32 in. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 22: Service Parts

    C. Service Parts QV26E-B Service Parts Beginning Manufacturing Date: Apr 2005 Exploded Parts Diagram Ending Manufacturing Date: Active QV26E-B 18 - Log Set Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 23 Slide Pot Rubber Boot 4038-811 Installation Manual 4038-897 26 in. Refractory - LH 4038-819 26 in. Refractory - RH 4038-820 Glass Retainer - Top 4038-012 Strain Relief Bushing (Switch Wires) 25756 Gasket Kit 4038-900 Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 24 This page intentionally left blank. Quadra-Fire • QV26E-B • 4038-897 Rev C • 11/05...
  • Page 25: Limited Warranty

    How to Obtain Service. To obtain service under this warranty you must: 1. Send written notice of the claimed condition to Quadra-Fire Technical Service Department, Hearth & Home Technologies Inc., 1445 North Highway, Colville, WA 99114-2124. 2. Provide proof of purchase, model number, serial number, and manufacturing date code to HHT.
  • Page 26: Contact Information

    E. Contact Information Hearth & Home Technologies Inc. 1445 North Highway Colville, WA 99114-2124 Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer, please call 1-800-926-4356. – NOTES – CAUTION DO NOT DISCARD THIS MANUAL •...

Table of Contents