Fastening Of The Control Panel (Cdp312R); Installing The Control Panel Directly On The Cabinet Door; Control Panel Mounting Platform Kit (Rpmp) - ABB ACS800-U4 Hardware Manual

Fastening of the control panel (CDP312R)

The control panel can be fastened directly to the cabinet door or to a mounting
platform.

Installing the control panel directly on the cabinet door

Fasten the control panel from the back side with two screws of one of the following
types:
• standard screw with nominal diameter of 4 mm (0.16 in.)
• patting screw with nominal diameter of 4.2 mm (0.17 in.) DIN 7981 C,
DIN 7982 C, DIN 7983 C or DIN 7976 C
• PT screw for thermoplastics with nominal diameter of 4 mm (0.16 in.).
Cabinet door
(0.16...0.31 in.)
Tightening torque:
1 Nm (0.74 lbf ft)

Control panel mounting platform kit (RPMP)

For installation of the mounting platform, see Control Panel Mounting Platform Kit
(RPMP) Installation Guide [3AFE 64677560 (English)].
Control panel
4...8 mm
10 mm (0.39 in.)
View from outside the cabinet door
Cabinet assembly planning
31