114 Electrical installation
2
5
4
Connecting a control panel
With control panel door mounting platform, connect the control panel as follows:
1.
Connect an Ethernet cable to the RJ-45 connector of the control panel.
2.
Connect the other end of the cable to the X13 connector of the control unit.
Note: When a PC is connected to the control panel, the control panel keypad is disabled.
In this case, the control panel acts as a USB-RS485 adapter.
Panel bus (Control of several units from one control panel)
One control panel (or PC) can be used to control several drives (or inverter units, supply
units etc.) by constructing a panel bus. This is done by daisy-chaining the panel
connections of the drives. Some drives have the necessary (twin) panel connectors in