Installation And Commissioning Flowchart - ABB ACS800-U4 Hardware Manual

18
The ACS800-04/U4
Cabinet assembly planning
Cabinet layout examples
Electrical installation planning
protections and the cable routing.
Installation
Motor control and I/O board (RMIO)
control and I/O board and its specifications.
Installation checklist
the drive.
Maintenance
Technical data
sizes and technical requirements, provisions for fulfilling the requirements for CE
and other markings and warranty policy.
Dimensional drawings
Resistor braking
and resistors. The chapter also contains technical data.

Installation and commissioning flowchart

Identify the frame size of your drive, R7 or R8.
Plan the installation.
Check the ambient conditions, ratings, required
cooling air flow, input power connection, compatibility
of the motor, motor connection, and other technical
data.
Select the cables.
Unpack and check the units.
Check that all necessary optional modules and
equipment are present and correct.
Only intact units may be started up.
Check the installation site.
About this manual
describes the drive.
instructs on cabinet design.
shows example layouts.
instructs on the motor and cable selection, the
instructs how to place, mount and wire the drive.
helps in checking the mechanical and electrical installation of
contains preventive maintenance instructions.
contains the technical specifications of the drive, e.g. the ratings,
contains the dimensional drawings of the drive.
describes how to select, protect and wire optional brake choppers
Task
shows external control connections to the motor
Technical data / IEC ratings
NEMA ratings
Technical data
Cabinet assembly planning
Electrical installation planning
Option manual (if optional equipment is
included)
Installation: Moving the
If the converter has been non-operational for
more than one year, the converter DC link
capacitors need to be reformed. Ask ABB for
instructions.
Installation: Before installation
Technical data
See
or US tables /
unit.