Type Code - ABB ACS800-U4 Hardware Manual

Type code

The type code contains information on the specifications and configuration of the
drive. The first digits from left express the basic configuration (e.g. ACS800-04-
0170-5). The optional selections are given thereafter, separated by + signs (e.g.
+E202). The main selections are described below. Not all selections are available for
all types. For more information, refer to ACS 800 Ordering Information (EN code:
64556568, available on request).
Selection
Product series
Type
Size
Voltage range
(nominal rating in bold)
+ options
Resistor braking
Filter
Fieldbus
I/O
Application program
Language of manual
Specialities
Alternatives
ACS800 product series
04 drive module. When no options are selected: 6-pulse diode input
bridge, IP 00, no EMC filter, Standard Application Program,
boards without coating, one set of English manuals.
U4 drive module (USA). When no options are selected: 6-pulse diode
bridge, open chassis, no EMC filter, Standard Application
Program (US), common mode filter in frame size R8, boards
without coating, one set of English manuals
Refer to Technical data: IEC
2 200/208/220/230/240 VAC
3 380/400/415 VAC
5 380/400/415/440/460/480/500 VAC
7 525/575/600/690 VAC
D150 brake chopper and busbars for brake resistor connection
E202 EMC/RFI filter for first environment TN (grounded) system,
restricted (the A limits)
E210 EMC/RFI filter for second environment TN/IT (grounded/
ungrounded) system
E204 du/dt limitation by gate drivers
E208 common mode filter
E209 light common mode filter
K... Refer to ACS 800 Ordering Information (EN code: 64556568).
L...
N...
R...
P901 coated boards
ratings.
The ACS800-04/U4
23