Safety Instructions; What This Chapter Contains; To Which Products This Chapter Applies; Use Of Warnings And Notes - ABB ACS800-U4 Hardware Manual

Safety instructions

What this chapter contains

This chapter contains the safety instructions which you must follow when installing,
operating and servicing the drive. If ignored, physical injury or death may follow, or
damage may occur to the drive, the motor or driven equipment. Read the safety
instructions before you work on the unit.

To which products this chapter applies

This chapter applies to the ACS800-01/U1, the ACS800-02/U2 and the ACS800-04/
U4.

Use of warnings and notes

There are two types of safety instructions throughout this manual: warnings and
notes. Warnings caution you about conditions which can result in serious injury or
death and/or damage to the equipment. They also tell you how to avoid the danger.
Notes draw attention to a particular condition or fact, or give information on a
subject. The warning symbols are used as follows:
Dangerous voltage warning warns of high voltage which can cause
physical injury and/or damage to the equipment.
General warning warns about conditions, other than those caused by
electricity, which can result in physical injury and/or damage to the
equipment.
Electrostatic discharge warning warns of electrostatic discharge which
can damage the equipment.
11
Safety instructions