Setting The Thread Take-Up Spring - Husqvarna Saphire Series Service Manual

Settings

23.Setting the thread take-up spring

Check
The thread take-up spring (A) should have completed its movement when the the needle eye reaches the
fabric. The check has to be carried out at 2.5 mm straight stitching and using normal cotton fabrics and
polyester thread.
Adjustment
NOTE! Before any adjustment is done please check that the lower and upper thread tension is cor-
rect.
1. Remove the tension cover on the front cover.
2. Turn the thread tension body (B) with a screw driver until a correct thread take-up is obtained.
B
A
B
32 104 72 79-26