Base Plate - Husqvarna Saphire Series Service Manual

Dismantling and mounting

Base Plate

FOR SAFTEY REASONS ALWAYS DISCONNECT THE POWER CORD FROM THE MACHI-
NE BEFORE REMOVING THE POWER SUPPLY.
Dismantling
1. Remove the 2 screws for the back cover.
2. Remove the 2 screws for front cover.
3. Remove the 2 screws (A) for the power supply.
4. Remove the 3 screws (B) for the Base plate.
Mounting
In reverse order.
B
A
42 104 72 79-26