Service Tools - Husqvarna Saphire Series Service Manual

Service tools

A reasonable requirement in a domestic sewing machine is that it should able to sew all types of fabrics used
in the home. The settings made when assembling and sewing-in the machines are those most suited to give
the best results in the majority of fabrics and fabric combinations. In doing so, consideration has been given
to the requirements of different markets. This does, however, mean that when sewing extreme fabrics, better
results may be obtained in certain cases by altering the settings. It must be pointed out that these altered set-
tings can cause poorer results on more normal fabrics. How the different standard ratings are set can be seen
from the description under each setting instruction. The following list of setting gauges and service tools is
intended as an instruction about the special service tools needed to servicing this machine.
1.On several different occasions the needle is used as a setting gauge.The setting ratings are adapted to needle 90.Make
sure to use an undamaged needle.
2.Gauge for setting the timing of the hook in relation to the needle.
Ref. No 63-102600-18/000 Spacer
Ref. No 61-111600-02/000 Feeler gauge 2.5
Ref. No 413 10 22 - 01 Needle clamp
3.Gauge for the feed dog lift.
Ref. No 413 12 73-01
4. Gauge for the needle height.
Ref. No 412 35 29-02
5.Allen key 2.5 mm
Ref. No 411 86 01-01
6. Allen key 2 mm
Ref. No 411 86 00-01
7. Allen key 1.5 mm
Ref. No 411 66 89-01
8. Allen key 4 mm
Ref. No 74-33006-27/000
8. Distance gauge 0.05-1.00 mm
Ref: No. 412 38 85-01
9.Angled key Torx 6
Ref No 412 27 67-01
10. Screwdriver Torx 8
Ref. No74-34008-41/000
11. Screwdriver Torx 10
Ref. No 412 36 48-01
12. Screwdriver Torx 20
Ref. No 412 36 49-01
13. Screwdriver Torx 25
Ref. No 412 36 50-01
14. Service DVD Sapphire - European Version (for PAL TV and DVDs) -
Ref. No 413 12 08-26
15. Service DVD Sapphire - US/CANADA Version (for NTCS TV and DVDs) -
Ref. No 413 12 05-01
104 72 79-26
5