Feed Dog Height - Husqvarna Saphire Series Service Manual

9. Feed dog height

Check
1. Bring the feed dog to its highest position.
2. The top of the feed dog should be 0.9-1.1 mm above the needle plate.
Check with setting gauge 413 12 73-01
Adjustment
1. Bring the feed dog to its highest position.
2. Remove the needle plate.
3. Adjust with a Torx 10 the adjustment nut (A) until a correct feed dog height (0.9-1.1 mm) is obtained.
Turn Clockwise :
Turn Anti-Clockwise :
4. Mount the needle plate and check the height.
0.9 - 1.1 mm
Settings
- it will be higher
- it will be lower
413 12 73-01
104 72 79-26
17