Remove Thread Tension Cover - Husqvarna Saphire Series Service Manual

Remove Thread tension cover

Dismantling
1. Remove back cover.
2. Remove front cover.
3. Remove cable from PCboard in front cover.
4. Remove two torx 10 screws from the back (A, B).
5. Remove the thread tension cover (C).
Mounting
1. Mount the thread tension cover (C).
2. Fasten the two torx 10 screws from the back (A, B).
3. Mount cable from PC board in front cover.
4. Mount front cover.
5. Mount rear cover.
C
A
B
104 72 79-26
65