Sequential Upgrade
If you choose multiple slave devices to upgrade their firmware, two options are available: "All-at-Once" and "Sequential". "All-
at-Once" will use the default method, all checked slaves will upgrade their firmware at the same time, while using "Sequential"
upgrade method, the slaves will upgrade their firmware one by one in order to:
Avoid entire Wi-Fi service interruption by full system firmware upgrade.
Reduce network bandwidth consumption caused by firmware downloading.
Once you choose sequential upgrade, the following icon
upgraded slaves out of the selected slaves.
Provisioning and Backup
The GWN76XX configuration can be backed up locally or via network. The backup file will be used to restore the configuration
on GWN76XX when necessary.
Download Configuration
Users can download the GWN76XX configuration for restore purpose under Web GUISystem
SettingsMaintenanceUpgrade.
Click on
to download the configuration file locally.
Upload Configuration
Users can upload configuration file to the GWN76XX under Web GUISystem SettingsMaintenanceUpgrade.
Click on
to browse for the configuration to upload.
Please note that the GWN76XX will reboot after the configuration file is restored successfully.
Choosing multiple devices
All-at-Once and Sequential Upgrade
will update you about the number of