Time Policy; Banned Clients; Bandwidth Rules - Grandstream Networks GWN76 Series User Manual

Time Policy

The timed client disconnect feature allows the system administrator to set a fixed time for which clients should be allowed to
connect to the access point, after which the client will no longer be allowed to connect for a user configurable cool-down
period.
The configuration is based on a policy where the administrator can set the amount of time for which clients are allowed to
connect to the Wi-Fi and reconnect type and value after which they will be allowed to connect back after they have been
disconnected.
To create a new policy, go under Captive Portal → Time Policy and add new one.
Then set the following parameters:
Option
Name
Enabled
Limit Client
Connection Time
Client Reconnect
Timeout Type
Client Reconnect
Timeout
Day of the Week
Hour of the Day
Note:
Time tracking shall be accounted for on a per-policy basis, such that a client connected to any SSID assigned the time tracking
policy will accrue a common counter, regardless of which SSID they are connected to (as long as those SSIDs all share the same
time tracking policy).

Banned Clients

The clients that have been banned after time disconnect feature has taken effect, these clients will not be allowed to connect
back until timeout reset or you can unblock a client by clicking on the icon

Bandwidth Rules

The bandwidth rule is a GWN76XX feature that allows users to limit bandwidth utilization per SSID or client (MAC address or
IP address).
This option can be configured from the GWN76XX WebGUI under "Bandwidth Rules".
Click to add a new rule, the following table provides an explanation about different options for bandwidth rules.
Description
Enter the name of the policy
Check the box to enable the policy
Sets amount of time a client may be connected.
Select the method with which we will reset a client's connection timer so they may reconnect
again. Options are: Reset Daily. Reset Weekly. Reset Hourly. Timed Reset.
If "Timed Reset" is selected, this is the period for which the client will have to wait before
reconnecting.
If "Reset Weekly" is selected, this is the day when the reset will be applied.
If "Reset Weekly" or "Reset Daily" is selected, this is the hour and day when the reset will be
applied.
Time Policy Parameters
.
Ban/Unban Client