Step 2:
Use a pencil to mark the four mounting holes (screw holes DIA 5.5mm, reticle hole DIA 25mm).
Step 3:
Insert screw anchors into the 5.5 mm holes. Attach the mounting bracket to the wall by inserting the screws into the anchors.
Step 4:
Connect the power cable and the Ethernet cable (RJ45) to the correct ports of your
GWN7664/GWN7660/GWN7660LR/GWN7664LR/GWN7630/GWN7610/
GWN7615/GWN7605/GWN7600/GWN7625/GWN7662
Step 5:
Align the arrow on the GWN AP with the arrow on the locking tab of the mounting bracket and ensure that your GWN is
firmly seated on the mounting bracket.
Step 6:
Turn the GWN clockwise until it locks into place and fits the locking tab.
Ceiling Mount
Step 1:
Wall Mount – Steps 1 & 2
Wall Mount – Steps 3 & 4
Wall Mount – Steps 5 & 6