Skyjack SJIII 3226 Service Manual page 31

Function Tests
Conventional
Test Elevated Drive peed
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. Ensure path of intended motion is clear.
2. Raise the platform until approximately a
height of 7 feet (2 meters) is reached and
attempt to drive forward or reverse.
Result: Aerial platform should move slower
than when it was in stowed position.
Test Tilt ensor - AN I/C A
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
Ensure that there are no personnel
or obstructions in the path of travel,
including blind spots.
1. Move the aerial platform on to a slope not
greater than 4.5°.
KYJACK, Page 32
Pothole Protection
Device
wARNiNG
wARNiNG
wARNiNG
ection 1 - cheduled Maintenance
Pothole Protection
Device
2. Use the ladder to dismount from
platform.
3. On base control console, slowly raise the
platform.
Result: When platform reaches an
appropriate height, a warning signal
should sound and platform stop raising
as lift and drive controls should be
disabled.
Compact
JIII eries