Skyjack SJIII 3226 Service Manual page 21

ervice and Maintenance
Compact
Emergency Lowering
Greasing Point
1.1-5 Hydraulic/Electric Tray ide
-
Ensure tray latch is secure and in proper
working order.
Pothole Protection Device
-
Ensure mechanisms have no sign of
visible damage and are free from dirt and
obstructions.
Hydraulic Tank
-
Ensure hydraulic filler cap is secure.
-
Ensure tank shows no visible damage
and no evidence of hydraulic leakage.
Hydraulic Oil
-
Ensure platform is fully lowered, and then
visually inspect the sight gauge located
on the side of the hydraulic oil tank.
-
he hydraulic oil level should be at or
slightly above the top mark of the sight
glass.
C - Annual Inspection
-
For hydraulic oil replacement procedure,
refer to section 5.
Hydraulic Pump and Motor
-
Ensure there are no loose or missing
parts and there is no visible damage.
KYJACK, Page 22
Access Rod
Main Manifold
ection 1 - cheduled Maintenance
ilt Sensor
Greasing Point
Electrical Panel
Hydraulic ank
Electrical Panel
-
Ensure panel is properly secured and
there is no visible damage.
-
Ensure there are no loose wires or
missing fasteners.
Proportional and Main Manifolds
-
Ensure all fittings and hoses are properly
tightened and there is no evidence of
hydraulic leakage.
-
Ensure there are no loose wires or
missing fasteners.
Tilt ensor - AN I/C A
-
Ensure tilt sensor is properly secured and
there is no visible damage.
Load/Tilt ensor - CE
-
Ensure load/tilt sensor is properly secured
and there is no visible damage.
Emergency Lowering Access Rod
(If Equipped)
-
Ensure rod is properly secured and there
is no visible damage.
Hydraulic/Electric
ray
JIII eries