Skyjack SJIII 3226 Service Manual page 29

Function Tests
Lift/Drive/Steer Enable
rigger Switch
Inclined Drive/Level Drive
Switch
Lift/Off/Drive Switch
Platform Control Console with Toggle witch
Test Brakes
Brakes will engage instantly when you
release the controller handle, causing
aerial platform to stop immediately.
1. Ensure path of intended motion is clear.
2. Activate and hold "
switch.
3. Drive aerial platform "
" " backward. est brake by releasing
controller handle.
Result: Aerial platform should come to
a stop. If aerial platform pulls to one side
while stopping, do not operate aerial
platform until brake adjustments have
been checked.
4. Drive aerial platform "
then " " backward. est brake again
by releasing "
only.
KYJACK, Page 30
Rocker Switch
Controller
Emergency Stop Button/
Operation Light
Horn Pushbutton
wARNiNG
" enable trigger
" forward and then
" forward and
" enable trigger switch
ection 1 - cheduled Maintenance
Lift/Drive/Steer Enable
rigger Switch
Lift/Inclined Drive/Level Drive Switch
Platform Control Console with Rotary witch
Result: Aerial platform should come to an
instant and abrupt stop. If aerial platform
does not stop immediately, or if aerial
platform pulls to one side while stopping,
do not operate aerial platform until brake
adjustments have been checked.
Test Platform Raising/Lowering
Be aware of overhead obstructions
or other possible hazards around the
aerial platform when lifting.
1. For platform control console with toggle
switch:
Select lift/off/drive switch to "
position.
For platform control console with rotary
switch:
Select lift/inclined drive/level drive switch
to " " lift position.
2. Activate and hold "
switch.
Rocker Switch
Emergency Stop Button/
Operation Light
Horn Pushbutton
wARNiNG
" lift
" enable trigger
JIII eries